Overview

Provide Night Bell Over your Existing Paging Amplifier!

The K-600D eliminates the installation of multiple bells, relays and power supplies, whenever night bells, loud ringing or emergency tones are required. The K-600D provides an existing paging amplifier with a pleasant electronic warble tone each time it receives ring voltage from a C.O. line or analog PABX/KSU extension.

The K-600D requires no external power supply and provides a floating 600 ohm audio output. Auxiliary N.O./N.C. relay contacts are provided during ring signal for muting, switching or operation of external signaling devices. Volume and tone controls are also provided.



Applications
Night bell over paging
Loud ringing over paging
Contact closure on ringing

Features
Provides tone over existing paging amplifiers
Auxiliary relay contacts provided
Connects directly to ringing C.O. Lines or analog PABX/KSU stations
Floating 600 ohm output
Made in the USA

Specifications
Ring Voltage: 60V AC minimum, 15Hz - 70Hz
Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x 1.75”)
Shipping Weight: 1.36 kg (3 lbs.)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity
Output: Floating 600 ohm , less than .5 VPP
Connections: (1) RJ11 jack and 5 position screw terminal strip
Maximum Cable Run: 15.24m (50 ft)
Relay Contact Ratings: .5A @ 125V AC/1A @ 30V DC

Applications

• If you already have a paging system the K-600D will let you send ringing over the paging system of any line you connect to the K-600D.
• If you want a night line that will ring to alert the night crew you would only connect one line and they would call that line after hours to bypass voice mail.