Overview

Viking PI-1

Interface your Existing Public Address System with Nearly any Phone System!

Viking’s Universal Telecom/Paging Interface allows you to provide paging from nearly any phone system instead of from a microphone. You can also provide background music and electronic night bell over the audio system.

In the event a paging port is not available, the PI-1 can provide talk battery to allow connection of the public address system to an unused trunk input on the phone system.

The electronic night bell feature is activated by a standard ringing C.O. line, analog PABX/KSU station circuit or by a common audible contact closure provided by an electronic key system.

The PI-1 features a built-in voice activated (VOX) or AC ring activated relay which provides D.P.D. T. contacts for muting background music during paging or to provide an electronic night bell. These contacts are necessary when interfacing with systems such as Panasonic, South Western activated Bell, Intertel, etc., which do not provide a paging contact closure.



Applications
Integrate your public address system with nearly any phone system
Cut out background music during paging
Electronic night bell from ringing line or contact closure

Features
Floating 600 ohm output
Selectable 12V DC talk battery for interfacing with C.O. ports
Paging port interface
Ringing analog line input for night bell
Contact closure input for night bell
Normally open and normally closed VOX activated contacts for cutting out background music
Adjustable VOX contact time-out
Adjustable ring volume
Made in USA

Specifications
Power: 120V AC/12V DC 500mA, UL listed adapter provided
Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x 1.75”)
Shipping Weight: .45 kg (1 lb)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity
Relay Contacts: 30V DC@1A, 110V DC@0.3A, 125V AC @0.5
Maximum Ring Output: 490mV AC RMS no load, 150mV AC RMS@600 ohms
VOX Minimum Audio Signal to Activate Relay: 50mV AC RMS@1K Hz
Talk Battery: 12V DC