Overview

Viking K-1900-9 Single or Multi-Number Dialer

AC Powered Dialer with Increased Toll Restriction and Added Versatility. The K-1900-9 may be used with any standard Touch Tone phone to provide single number (hot-line) or multi-number speed dialing.

The K-1900-9 is capable of storing 100 telephone numbers in non-volatile E2 memory and will operate on any standard loop start C.O. line or analog PABX/KSU station with a standard Touch Tone phone.

When programmed as a multi-number dialer, the K-1900-9 will allow the user to enter a 1 or 2 digit Touch Tone code which will trigger the unit to speed dial one of up to 100 different telephone numbers. When programmed as a single number hot-line dialer, the K-1900-9 will dial a single pre-programmed number when any off-hook condition is detected on the “PHONE” port. The K-1900-9 can also be used as an alarm dialer, initializing speed dialing from a contact closure.

Specifications

Viking K1900-9 Single or Multi-Number Dialer

• Programmable as a single number hot-line dialer or a multi-number dialer
• Stores up to (100) 32-digit phone numbers
• Non-volatile E2 memory (no batteries required)
• Local or remote programmable with a standard Touch Tone phone
• AC power allows installation on nearly any analog line
• Touch Tone dialing with normal or high speed settings
• Increased toll restriction (programmable on/off)
• Ring thru mode allows you to call the phone connected to the dialer
• LED status indicator
• Push button security code override
• Allows 911 dialing
• Single number alarm dialer mode
• Programmable call timer
• Power: 120V AC/13.8C AC, 1.25A UL listed adapter provided
• Dimensions: 70mm x 36mm x 120mm (2.8" x 1.4" x 4.7")
• DTMF Dialing Speed: Normal = 120ms on/off, High Speed = 60ms on/off
• Connections: (1) RJ11 jack, (1) RJ11 plug
• Part Number: K-1900-9

Documents

Viking K1900-9 AC Powered Dialer

• Viking K-1900-9 AC Powered Single or Multi-Number Dialer Technical Information