Overview

Viking LM-24M

See at a Glance when Lines are Ringing or In-Use

The LM-24S System provides a visual status of up to 24 lines or stations. If a line or station is in use, the corresponding LED will light steady, a ringing line or station will show a flashing LED.

Even if a ringing phone is out of hearing range, a common audible tone calls the operator’s attention to the visible display. The tone is adjustable for convenient operation.

The LM-24S Line Status Monitor System is designed for professional and efficient call processing at department answering positions, message centers and back-up attendant stations. Each LM-24S Line Status Monitor System includes one LM-24D Display and one LM-24M Scanner.



Applications
Ideal for areas where personal attention must be given to every call
Eliminates the additional cost of adding a PABX console or key system
Allows for full utilization of all call pickup features
Monitors the status of lines or stations

Features
Visual status for up to 24 analog lines or stations (idle, in-use, ringing)
Programmable ring indication on a per-line basis
Adjustable display viewing angle for desk or wall mounting
Displays require only a single pair of wires
Powers up to (3) LM-24D or LM-12W displays
User printable extension identification cards
Adjustable audio volume
Quick installation
Includes both the display and the scanner
Made in the USA

Specifications
Power: 120V AC/13.8V AC 1.25A UL listed adapter provided
Dimensions: 133mm x 130mm x 38mm (5.25" x 5.1" x 1.5")
Shipping Weight: .68 Kg (1.5 lbs.)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
Connections: (1) RJ21X connector (1) RJ11 jack
Maximum Display Runs: (1) display: 244m (500 ft), (2) display: 122m (400 ft), (3) displays: 61m (200 ft)