Overview

LM-24D Line Status Monitors

See at a Glance when Lines are Ringing or In-Use
The LM-24S System provides a visual status of up to 24 lines or stations. If a line or station is in use, the corresponding LED will light steady, a ringing line or station will show a flashing LED.
Even if a ringing phone is out of hearing range, a common audible tone calls the operator’s attention to the visible display. The tone is adjustable for convenient operation.
The LM-24S Line Status Monitor System is designed for professional and efficient call processing at department answering positions, message centers and back-up attendant stations. Each LM-24S Line Status Monitor System includes one LM-24D Display and one LM-24M Scanner.

Specifications

LM 24D Line Status Monitors

• Visual status for up to 24 analog lines or stations (idle, in-use, ringing)
• Programmable ring indication on a per-line basis
• Adjustable display viewing angle for desk or wall mounting
• Displays require only a single pair of wires
• Powers up to (3) LM-24D or LM-12W displays
• User printable extension identification cards
• Adjustable audio volume
• Quick installation
• Includes both the display and the scanner
• Made in the USA

• Power: 120V AC/13.8V AC 1.25A UL listed adapter provided
• Dimensions: 133mm x 130mm x 38mm (5.25" x 5.1" x 1.5")
• Environmental: 0C to 32C (32F to 90F) with 5% to 95% non-condensing humidity
• Connections: (1) RJ21X connector (1) RJ11 jack
• Maximum Display Runs: (1) display: 244m (500 ft), (2) display: 122m (400 ft), (3) displays: 61m (200 ft)

Applications

LM24D Amplified

• Ideal for areas where personal attention must be given to every call
• Eliminates the additional cost of adding a PABX console or key system
• Allows for full utilization of all call pickup features
• Monitors the status of lines or stations

Documents

Viking LM-24D Line Status Display

• Viking LM-24S Line Status Monitor System Technical Information