Overview

Viking E-1600A-TP2-EWP Emergency Phone

For use with Talk-A-Phone tower, pedestal, surface, wall and flush mount enclosures. Code Blue towers require redrilling and tapping. The E-1600A-TP-EWP or Viking E-1600A-TP2-EWP will call up to 5 programmable emergency numbers, as well as 2 central station numbers and send a digital announcement to identify the location of the emergency call. The included LDB-3 control module will supply a contact or switched 12V DC to activate a strobe light. In addition, the E-1600ATP2- EWP features a second “Info” button that will dial up to 3 non-emergency numbers.

Though the strobe requires external power to operate, voice communication is possible during power failures. All phone numbers, location numbers, voice announcement and programming parameters are stored in non-volatile memory. No batteries are required. The E-1600A-TP-EWP and E-1600A-TP2-EWP are equipped for outdoor or harsh environments with Enhanced Weather Protection, which features: potted circuit boards, sealed trim pots and dip switches, rubber gaskets and boots, gel-filled butt connectors, and extended operating temperature: -15 F grades to 130 F grades, tested to -35F grades.

Specifications

Viking E1600A-TP2-EWP Emergency Phone

• Enhanced Weather Protection (EWP)
• Meets ADA requirements for Emergency Phones:
  • Can automatically light the “Call Connected” LED for the hearing impaired
  • Transmits a unique location I.D. code or voice announcement
  • Grade 2 Braille label for the visually impaired
• Non-volatile digital voice announcer with 16 seconds of voice memory
• Provides contact or switched 12V DC for controlling a strobe light
• Advanced call progress detection
• Handsfree operation
• Phone line powered emergency phone (LDB-3 requires power)
• Non-volatile memory (no batteries required)
• Touch Tone or pulse dialing
• Dials up to 5 emergency numbers
• E-1600A-TP2-EWP can also dial up to 3 non-emergency “Info” numbers
• Cycles through backup emergency and non-emergency numbers on busy or no-answer
• Hangs up on CPC, silence, busy signal, dial tone, time-out or Touch Tone command
• Programmable to auto-answer on incoming calls
• Remotely programmable
• Central Station Monitoring capability (dials 2 numbers)
• Separate central station voice speed dial number
• Optional PB-100 Polling System available (see page 10)
• High visibility, vandal and weather resistant
• Telephone line powered. Minimum 24V DC talk battery voltage, with a minimum loop current of 20mA loop (room temp), or 25mA (extended cold temp range). Loop current may be boosted on low current lines with a Viking Model TBB-1A talk battery booster (Fax Back # 630). LDB-3
• Control Module: 120V AC/12V DC 500mA, UL listed adapter provided
• Dimensions: 241mm x 299mm x 51mm (9.5” x11.75” x2”)
• Mounting: Flush mount to Talk-A-Phone ETP towers, wall mounts, boxes and pedestals
• Material: .125” (11 gauge) brushed stainless steel
• Connections: Color-coded wires with gel-filled butt connectors
• Part Number: E-1600A-TP2-EWP

Documents

Viking E-1600A TP2 EWP Enhanced Weather Protection ADA Compliant Emergency Phones

• Viking E-1600A-TP/TP2-EWP ADA Compliant Emergency Phones Technical Information