Overview

Viking ATA-100 Analog Telephone

Provide an IP Network Connection for Analog Telephone Devices. The ATA-100 is an analog telephone adapter that connects an analog telephone device to an IP network, enabling SIP-supported VoIP communication in applications where connecting to an existing FXS port is not possible or practical. In addition, the ATA-100 has an RJ-11 port for switching to the PSTN analog phone network via touch tone commands.

Device programming is handled by a built-in web browser. IP address assignment can be accomplished either by DHCP or by manually assigning a static IP address. The ATA-100 can be used with or without SIP registration. If unregistered, the ATA-100 can perform basic tasks like sending voice data to an IP-PBX or to another device on a LAN. SIP registration opens up an impressive list of calling features and also enables internet telephone calling.

Specifications

Viking ATA100 Analog Telephone

• Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP, DNS, DHCP, NTP, PPPoE, STUN, TFTP, etc.
• Powerful digital signal processing (DSP) to ensure superb audio quality.
• Supports various codecs including G.711 (a-law and u-law), G.723.1 (5.3K/6.3K), and G.729A/B
• Supports out-of-band DTMF via RTP (RFC2833) or SIP INFO.
• Supports Caller ID/Name display.
• Supports Call Hold, Call Waiting/Flash, Call Transfer, and Call Forward.
• Supports automated NAT traversal without manual manipulation of firewall/NAT
• Supports QoS
• Supports device configuration via built-in IVR or Web browser
• Supports firmware upgrade via FTP
• Power: 100-240V AC, 50-60 Hz 0.3A, power cord supplied
• WAN Interface: 1xRJ45 100Base-T
• LAN Interface: 1xRJ45 100Base-T
• FXS Telephone Port: 1xRJ11
• PSTN Port: 1xRJ11
• LED: VoIP/PSTN, POWER (The POWER LED is green. The VoIP/PSTN LED is bicolor yellow/green.)
• Dimensions: 118mm (W) x 74mm (D) x 28mm (H)
• Humidity: 10% to 95% (noncondensing)
• Part Number: ATA-100